Home > EMC > Useful naviseccli commands

Useful naviseccli commands

The following are some handy naviseccli commands, replace username, password and the 192.168.0.1 with your storage log in details and IP.

Check the FRUMON code level on the LCC’s
naviseccli -scope 0 -user username -password password -address 192.168.0.1 getcrus –lccreva
naviseccli -scope 0 -user username -password password -address 192.168.0.1 getcrus -lccrevb

Check the Backend Bus speeds
naviseccli -scope 0 -user username -password password –address 192.168.0.1 backendbus –get –speeds 0

SP cache details
naviseccli -scope 0 -user username -password password -address 192.168.0.1 getcache

Get all the details of the Lun’s on the array
naviseccli -scope 0 -user username -password password -address 192.168.0.1 getlun

Review IO Ports on an array
naviseccli -h sanipaddress -user username -password password -scope 0 ioportconfig -list |more

All details from the Array
naviseccli -scope 0 -user username -password password -address 192.168.0.1 getall

Advertisements
Categories: EMC
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: